Corporate Group

Building Machines

NEWS

> Home > Products > Building machines > FRD

FRD Large Hydraulic Hammer

Application areas

Demolition and recycling
Direct extraction
Stone block holing
At the breaking face in stone quarries
Road construction
Ditches
Building pits
Tunnel construction
Foundation work
Horticulture and landscaping

Advantages

Utmost reliability
Universal operation
High productivity rates
Low-maintenance design of the striking tool
Few moving parts: Control slide, impacting piston, chisel
Unique hammer control for maximum performance on each carrier unit
Prepared for connection to a central lubricating system as standard
Prepared for forced ventilation during underwater service as standard
Safeguarded against no-load striking (F12 - F45)
Pressure limiting valve 225 bar
Pneumatic Dust Shield (F12 - F70)

F-series	Unit	F12	F19	F20	F22	F27	F30	F35	F45	F70	F100
1) Service weight, 2) T-BOX	kg	835	1260	1570	1570	1710	2270	2270	3310	4350	6800
Height with insert tool, T-BOX	mm	1970	2270	2348	2348	2455	2648	2648	2850	3235	3800
Working pressure	min. bar	160	160	145	160	160	145	160	160	160	160
	max. bar	180	180	180	180	180	180	180	180	180	180
Oil requirements	min. l/min	100	120	125	145	155	150	175	200	250	280
	max. l/min	130	155	160	180	190	210	220	250	340	390
Number of impacts 1/min	min. bpm	450	400	400	360	340	350	320	300	250	200
	max. bpm	900	750	550	700	650	450	600	500	500	350
Impact energy	max. joules	2320	3579	4320	4572	5118	6480	6883	8829	13667	15690
Insert tool Ø	mm	105	120	135	135	140	150	150	165	180	210
Internal hose Ø high/low pessure	mm	19	25	25	25	25	25	25	32	32	32
Carrier unit	tons	10 - 16	12 - 19	16 - 25	16 - 25	20 - 30	25 - 40	25 - 40	30 - 50	45 - 70	65 - 100

Subject to technical changes without previous notification from the manufacturer.

1) Weight, including insert tool, hose set, bolt set or medium-sized mounted plate (according to CE Guidelines)
2) T-BOX = Sound proofing and vibration damping

FRD Small Hydraulic Hammer

Application areas

Building core removal
Horticulture and landscaping
Road construction
Pipeline construction
Building pits
At the breaking face in stone quarries
Advantages

Advantages

Utmost reliability
Low-maintenance design of the striking tool
Few moving parts: Control slide, impacting piston, chisel
Unique hammer control for maximum performance on each carrier unit

The correct casing for every application

Standard case with bolt connection
Standard case with flange connection for mounted plates
LN case with flange connection for mounted plates (sound and vibration reducing case)

F-series	Unit	F1	F2	F3	F4	F5	F6	F9
1) Service weight, standard	kg	67	86	130	172	230	370
1) Service weight 2) T-BOX	kg		109	149	200	283	355	520
Hight with insert tool, standard	mm	899	1015	1115	1230	1352
Hight with inster tool, T-BOX	mm		1050	1159	1255	1369	1400	1595
Working pressure	min. bar	100	100	100	100	100	100	120
	max. bar	140	140	140	140	140	160	170
Oil requirements	min. l/min	9	14	22	28	38	50	45
	max. l/min	20	32	42	50	65	150	150
Number of impacts 1/min	min. bpm	900	900	850	750	700	650	400
	max. bpm	1250	1200	1200	1000	900	1600	1400
Impact energy	max. joules	160	260	345	490	710	884	1305
Insert tool Ø	mm	36	45	52	60	68	75	90
Internal hose Ø higth/low pressure	mm	9	12	12	12	12	12	19
Carrier unit	ton	0,5 - 1,5	1 - 2,5	1,5 - 4	2 - 5	3 - 7	3,5 - 10	6 - 12

FRD Concrete & Steel Shears

Application areas

FRD Combination Shears can divide and cut through concrete and steel structures. The cast-steel case absorbs the torsion forces that can arise during extreme operating conditions. A long service life of the arms is assured. Cutting capacity with H-profiles:
450 x 200 x 9/14 mm

Type		VC15FT	VC22FT
Service weight	kg	1260	2200
Opening with	mm	660	895
Overall length	mm	1805	2615
Breaking power of tooth	kN	550	690

Cutting power at the center of knife	kN	1050	1420
Knife length	mm	340	530
Oil requirements	l/min	80 - 220	150 - 250
Working pressure	bar	280 - 320	280 - 320
Internal hose Ø hight/low pressure	mm	19	25
Slewing gear 360°		hydraulisch
Carrier units	t	13 - 20	20 - 30
Rapid-action valve		ja
Opening and closing speed
Oil requirements of slewing motor	l/min		15 - 25
Working pressure of slewing motor	bar		140
Internal hose Ø slewing	mm		9
Internal hose Ø leakage oil	mm		9

Subject to technical changes without previous notification from the manufacturer.

FRD Demolition & Sorting Grab

1.) FMP-PL Universal Grab

Excavator weight class: 1- 40 t

FRD universal grab for manifold operations and for handling of a wide range of different materials, e.g.:

Paving work
Sorting building rubble
Loading and sorting recycling materials
Excavating and loading of coarse bulk material
Handling bushes and shrubs

Constructional features:

Hydraulic slewing unit with heavy-duty axial and radial bearings
- FMP10-PL to FMP30-PL with compact slewing motor
- FMP40-PL to FMP60-PL with slewing-ring drive
Flat compact construction - hydraulic grab and synchronous steering systems protected within the cross-beam
FMP20-PL to FMP60-PL with end-position damping within the lifting cylinder
Self-holding valves on the cylinders prevent unintentional opening of the grab
Mechanical opening and closing stop points
Side part and base cutting edges of the shells made of high-tensile fine-grain steel ( Hardox 400)
FMP10-PL with screw-in tooth / FMP20-PL to FMP60-PL with ESCO sleeve-socket tooth
A grab in floating design is also available

Available accessories and equipment

Sets of hoses, adapter plates and suspensions for all known excavator makes
Rapid-action valve
Special shells according to the client’s requirements
Other special versions upon request

Technical data	Type	FMP10-PL	FMP20-PL	FMP30-PL	FMP40-PL	FMP50-PL	FMP60-PL
Excavator weight	t	1 - 5	5 - 9	9 - 15	16 - 22	23 - 30	29 - 40
Volume	L	50	120	270	480	570	920
Max. carrying capacity of grab	t	1	2	4	6	6	8
Max. carrying capacity of slewing motor	t	5	10	15	20	20	30
Weight without mounted plate	kg	195	450	800	1410	1570	2170
Dimensions A	mm	695	960	1200	1580	1580	1900
Dimensions B	mm	720	1000	1210	1560	1560	1735
Dimensions C	mm	610	900	1145	1360	1360	1510
Dimensions D	mm	970	1400	1790	2055	2055	2500
Cutting width E	mm	400	500	660	790	950	100
Bohrbild Anbauplatte					F35LN	F35LN	F45LN

Maclosing forcex.	kN	20	37	60	72	72	90
Operating pressure - Grab	bar	250	350	350	350	350	350
Operating pressure - Slewing	bar	200	250	250	140	140	140
Slewing connections		M18x1,5	G½"	G½"	12L	12L	12L
Grab connections		M18x1,5	G¾"	G1"	25S	25S	25S
Max. oil requirements - Selwing	L/min	20	28	48	30	30	30
Max. oil requirements - Grab	L/min	22	40	60	70	70	90

2.) FSG-PL Sorting Grab

Excavator weight class: 1 - 40 t

FRD universal sorting grab for widely differing operations and for handling widely differing materials, e.g.:

Sorting building rubble
Loading and sorting recycling materials

Constructional features:

Hydraulic slewing unit with heavy-duty axial and radial bearings
- FSG10-PL to FSG30-PL with compact slewing motor
- FSG40-PL to FSG60-PL with slewing-ring drive
Flat compact construction - hydraulic grab and synchronous steering systems protected within the cross-beam

FSG20-PL to FSG60-PL with end-position damping within the lifting cylinder
Self-holding valves on the cylinders prevent unintentional opening of the grab
Mechanical opening and closing stop points
Side part and base cutting edges of the shells made of high-tensile fine-grain steel ( Hardox 400)
Screw-in exchangeable knives made of high-tensile fine-grain steel ( Hardox 400 )
A grab in floating design is also available

Technical data	Type	FSG10-PL	FSG20-PL	FSG30-PL	FSG40-PL	FSG50-PL	FSG60-PL
Excavator weight class	t	1 - 5	5 - 9	9 - 15	16 - 22	23 - 30	29 - 40
Volume	L	80	200	370	650	720	900
Max. carrying capacity of grab	t	1	2	4	6	6	8
Max. carrying capacity of slewing motor	t	5	10	15	20	20	30
Weight without mounted plate	kg	200	460	830	1475	1530	1680
Dimensions A	mm	820	1010	1200	1595	1600	1720
Dimensions B	mm	720	890	1070	1390	1390	1470
Dimensions C	mm	650	940	1170	1430	1430	1420
Dimensions D	mm	1110	1620	1920	2225	2260	2340
Cutting width E	mm	400	600	800	900	1000	1100
Hole pattern mounted plate					F35LN	F35LN	F45LN

Max. closing force	kN	15	36	59	69	69	88
Operating pressure - Grab	bar	250	250	350	350	350	350
Operating pressure - Sewing	bar	200	250	250	140	140	140
Slewing connections		M18x1,5	G½"	G½"	12L	12L	12L
Grab connections		M18x1,5	G¾"	G1"	25S	25S	25S
Max.oil requirements - Slewing	L/min	20	28	48	30	30	30
Max. oil requriements - Grab	L/min	22	40	60	70	70	90

FSG70-PL (40-50t) opon request

3.) FDG-PL Demolition and Sorting Grab

Excavator weight class: 1 - 40 t

FRD Demolition and Sorting Grab for widely differing operations and for handling widely differing materials, e.g.:

Demolition / Rubble sorting
Sorting building rubble
Loading and sorting recycling materials

Constructional features:

Hydraulic slewing unit with heavy-duty axial and radial bearings
- FDG10-PL to FDG30-PL with compact slewing motor
- FDG40-PL to FDG60-PL with slewing-ring drive
Flat compact construction - hydraulic grab and synchronous steering systems protected within the cross-beam
FDG20-PL to FDG60-PL with end-position damping in the lifting cylinder
FDG10-PL to FDG60-PL self-holding valves on the cylinders prevent unintentional opening of the grab
Mechanical opening and closing stop points
Side part and base cutting edges of the shells made of high-tensile fine-grain steel ( Hardox 400)
Screw-in exchangeable knives made of high-tensile fine-grain steel ( Hardox 400 )
A grab in floating design is also available

Available accessories and equipment

Sets of hoses, adapter plates and suspensions for all known excavator makes
Rapid-action valve
Special shells according to the client’s requirements
Other special versions upon request

Technical data	Model	FDG10-PL	FDG20-PL	FDG30-PL	FDG35-PL	FDG40-PL	FDG50-PL	FDG60-PL
Excavator weight class	t	1 - 5	5 - 9	9 - 15	15 - 20	20 - 25	23 - 30	29 - 40
Volume	L	80	200	370	370	650	760	925
Max. carrying capaxity of grab	t	1	2	4	4	6	6	8
Max. carrying capacity of slewing motor	t	5	10	15	15	20	20	30
Weight without mounted plate	kg	220	510	900	940	1590	1830	2170
Dimensions A	mm	820	1010	1200	1350	1600	1710	1800
Dimensions B	mm	720	890	1070	1200	1450	1490	1600
Dimensions C	mm	650	940	1170	1170	1410	1450	1530
Dimensions D	mm	1110	1620	1920	1920	2260	2260	2500
Cutting width E	mm	400	600	800	800	900	1000	1230
Hole pattern mounted plate					F22LN	F35LN	F35LN	F45LN

Max. closing force	kN	15	36	59	59	60	75	75
Operating pressure - Grab	bar	250	350	350	350	350	350	350
Operating pressure - Slewing	bar	200	250	250	120	140	140	140
Slewing connections		M18x1,5	G½"	G½"	12L	12L	12L	12L
Grab connections		M18x1,5	G¾"	G1"	25S	25S	25S	25S
Max. oil requirements - Slewing	L/min	20	28	48	30	30	30	30
Max. oil requirements - Grab	L/min	22	40	60	80	80	90	90

FDG70-PL (40-50t) upon request

Subject to technical changes without previous notification from the manufacturer.

FRD Demolition Jaws

Application areas

The FRD Demolition Jaws will cut through concrete structures and concrete reinforcing steel.
The two-cylinder design gives the jaws an extremely wide opening for this weight class. The low-wear Hardox breaking arms ensure maximum breaking force at an absolute minimum of wear.

Advantages

360° slewing gear ensures that the optimal working position can always be set
Rapid-action valve for fast and efficient operation
Steel cutting knife for a high cutting capacity
Steel cutting knife can be turned around several times
Special steel structure for torsion-free operation and a long service life
Dust bonding kit optionally available

Type		Vp9 FT	Vp15 FT	Vp22 FT
Service weight	kg	860	1545	2700
A) Opening width	mm	480	820	1100
B) Overall length	mm	1385	1810	2155
C) Overal height	mm	910	1240	1640
Breaking force at the front	t	43	54	80
Breaking force in the middle	t	54	70	105
Cutting force	t	132	180	282
Knife length	mm	80	155	210
Oil requirements	l/min	50 - 80	80 - 150	150 - 250
Working pressure	bar	220 - 250	280 - 320	280 - 320
internal hose Ø high/low pressure	mm	19	19	25
Slewing gear 360°		hydraulisch
Oil requirements of slewing motor	l/min	-	10 - 20	15 - 25
Working pressure of slewing motor	bar	-	140	140
Internal hose Ø slewing	mm	-	9	9
Carrier units	t	8 - 15	15 - 20	25 - 30
Rapid-action valve		serienmäßig

Subject to technical changes without previous notification from the manufacturerne.

FRD Combination shears

Application areas

The FRD Combination Shears will cut through concrete structures and concrete reinforcing steel, and cut steel profiles.

Advantages

360° slewing gear ensures that the optimal working position can always be set
Rapid-action valve for fast and efficient operation
Steel cutting knife for a high cutting capacity
Steel cutting knife can be turned around several times
Special hollow-element steel structure for torsion-free operation and a long service life
Dust bonding kit optionally available

Type		Vm9 FT	Vm15 FT	Vm22 FT
Service weight	kg	790	1320	2040
A) Opening width	mm	520	680	920
B) Overall length	mm	1635	1815	2185
Breaking force 1)	t	28	42	51
Breaking force 2)	t	43	65	78
Cutting force	t	96	152	180
Knife length	mm	140	160	360
Oil requirements	l/min	50 - 80	80 - 150	150 - 250
Working pressure	bar	220 - 250	280 - 320	280 - 320
Internal hose Ø high/low pressure	mm	19	19	25
Slewing gear360°		hydraulisch
Oil requirements	l/min	-	10 - 20	15 - 25
Working pressure of slewing motor	bar	-	140	140
Internal hose Ø slewing	mm		9	9
Carrier units	t	7 - 12	13 - 20	19 - 25
Rapid-action valve		Serienmäßig